Tools | Water Level Control Valves

Water Level Control Structures and Valves

SKU: WATERCONTROL

Canadianpond.ca Products Ltd. has various valves for managing water flow and to control water levels in a variety of situations. Pond builders should consider installing an inline water level control structure in their dams, while retrofitting old water control structures can often be done with an inlet system. Flap gates, slide gates, and turn-out gates are other models we commonly sell.

Technical specifications

Inline Water Level Control Structure™

Inline water level control structureThis valve is designed to be installed buried in the dam or levee, protected from the element and easily accessed. They have typically stop logs that can be adjusted manually and have been tested for decades.

This valve can accommodate various types of pipes diameters from 4″ to 24″ (100 mm to 600 mm) with their flexible couplers that can attach and seal the valve for a permanent installation. The adjustable gates, or stop logs as they are known, have a rubber seal to prevent leakage and stainless steel lifting hooks. They vary in height from 2’ to 12’ (60 cm to 366 cm) to fit most size berm and dam structures. 5-year Warranty on all standard structures.

Inline Water Control Structure™ installation instructions (PDF)

Inlet Water Level Control Structure™

This valve is ideal to retrofit older water structures, where digging through the berm or dam is not possible.

The use of this valve is not recommended under freezing condition.

This valve can also accommodate various types of pipes diameters from 4″ to 24″ (100 mm to 600 mm) with a flexible coupler that can attach and seal the valve for a permanent installation. The adjustable gates, or stop logs, have a rubber seal to prevent leakage and stainless steel lifting hooks. They vary in height from 4’ to 12’ (60 cm to 366 cm) to fit most pond structures. 5-year Warranty on all standard structures.

 

Inlet Water Control Structure™ installation instructions (PDF)

Slides gates

Slide gates provide quick and easy shut-off on the control end of pipes and outlets. These valves are perfect not only for ponds and agricultural but also for industrial and commercial markets. They are designed to attach easily to any IPS/OD pipe. They are available to connect to pipes that are 2’’ to 12’’ (50 m m to 300 mm).

Heavy Duty Slide Gate Valves

The heavy-duty slide gate valves are rugged 15’’ and 18’’ (380 mm and 450 mm) made for the more demanding installations using SDR35 PVC pipes.

Flap Gates and Heavy Duty Flap Gates Flap Gate valve

Flap gates are designed to provide a shut-off on the discharge end of pipes to prevent flood water entering through culverts in dykes and levees. Flap Gates are available for pipe sizes 4” to 36” (100 mm to 900 mm). Flap gates are designed for corrugated metal, corrugated plastic or PVC pipes.

Grates and CollarsCheck valve

Standard grates are constructed of heavy steel and durable expanded metal. They are low profile, allow lawn-mowers to easily pass over and come with a durable powder coat finish for years of service.